Elan OLEXL Manual de instalación descargar pdf (Pagina 10)

10 of 11

HOMELOGIC CONFIGURATION DETAILS

The following table provides settings used in the HomeLogic Configurator. Please refer to the Configurator Reference Guide for more details.

o “<Select>” Select the appropriate item from the list (or drop-down) in the Configurator.

o “<User Defined>”, etc. Type in the desired name for the item.

o “<Auto>” This field will automatically populate during configuration

Devices Variable Name Setting Comments

Communication Devices Name

<User Defined> (Example: ELAN SC1)

Type Serial Port

Communication Type ViaNet SC1

Location <User Defined> (Not Required)

COM Port <Select>

Interface Devices<Auto Discover> Name

<User Defined> (Default: TS2 ViaNet XX)

See Note#1

Device Type ELAN TS2

COM Device

<Auto> (Default: ELAN SC)

See Note #2

VIA!NET ID <Auto> See Note #3

Enable Weather Page <Select> See Note #4

Enable Forecast Page <Select> See Note #4

Enable Sys Mode Page <Select> See Note #4

Media Zone <Select> See Note #5

Security Partition <Select> See Note #5

Lighting Keypad <Select> See Note #5

Thermostat <Select> See Note #5

Backlight Timeout <Select> See Note #5

Notes:

1. The TS2 keypads are automatically discovered, refer to Inititial Keypad Configuration Notes above

2. If not already chosen, select the COM device that refers the TS2 to the proper SC1 and COM port.

3. The TS2 keypad IDs will be addressed automatically as they are imported into the system.

4. Select <Yes> to enable the optional page

5. Select the desired zone, partition, or behavior for each keypad

1 2 ... 5 6 7 8 9 10 11

Sin comentarios

Elan OLEXL Manual de instalación Pagina 10